See this video to find out what the locking lever does: Why is my hose not pulling out of the Auto Reel?Įnsure that the locking lever is off.
To empty the hose, turn the tap off, pull out the hose and open the hose nozzle to empty excess water - letting the water flow through. Is it possible to empty the hose so that it's easier to store? Please contact consumer services by emailing Please ensure you have your original proof of purchase available. If the suggestions above do not work, the Auto Reel could be faulty. Unfortunately we do not provide instructions for disassembling the Auto Reel, due to the large metal spring inside that is held under high tension. Give it a sharp pull, and this should jumpstart the tension spring. When the hose is fully extended, take the last section of the hose, near the letterbox mouth, and raise it upwards to a 75 degree angle. Fully extend the hose to ensure there are no kinks or tangles inside the Auto Reel.ģ. When you are ready for the hose to re-wind, pull it again slightly and you will hear another click which will cause the hose to re-wind into the casing.Ģ.
Once it has clicked for the third time, release the hose slightly and it should then lock into place.
Auto rewind hose reel 40m series#
Pull out the hose to the desired length, and then pull again to hear a series of clicks. If the Auto Reel is failing to lock when the hose is pulled out, there are a few suggestions that you can try in order to get this up and running again:ġ. The hose won’t stop when pulling it, what should I do? Unfortunately it is not possible to replace the hose in the Auto Reel. Is it possible to buy a replacement hose without having to buy the whole unit again? You can purchase these on the Hozelock Spares site. Alternatively you can affix another bracket to the new location and transfer your Auto Reel between the two locations. You can purchase another feeder hose to extend the length. The Auto Reel comes with a 2 metre long feeder hose. How long is the hosepipe from the tap to where it can be hung? Other, more suitable, hardware should be sought fo fixing Auto Reel to a wooden post. Please note, the screws provided are for use when fixing into a brick wall. If fixing to a post, please ensure it is of a good structural nature, with good support at the base. It is recommended that the Auto Reel is fixed to a location that is structurally sound. The Auto Reel can be used with all Hozelock Sprinklers.Ĭan this be fitted onto a wooden fence or fence post? The return action then locks the hose in position. Once the hose is at the desired length, pull on the hose then release. The hose will lock at any point that you need it to. What are the dimensions? (excluding packaging) Type Of Auto Reel This convenient lock prevents the hose from being pulled out by children, ensuring the hose is only pulled out when needed. What is the switch at side of the reel for? What size padlock do I need to lock this to the bracket?Įither a 1.5 inch or 2 inch long shank padlock is ideal. It is recommended to use the Universal Hose Guide to prevent the hose from rubbing on the wall and damaging the hosepipe. The Auto Reel can be used when folded against a wall and can be used around corners.
Auto rewind hose reel 40m how to#
Please click find the relevant installation guide and how to video below:Ģ0m Auto Reel (2401) & 30m Auto Reel (2403)Ĭan I use the Auto Reel when folded against wall? How easy is it to assemble and fix to the wall?
0 kommentar(er)
